Image detection method for wheel-rail attack angle of vehicle mounted camera

Zengqiang Ma; Zibin Song; Yongsheng Wang

doi:10.11834/jig.170396

Column of CACIS 2017 | Views : 0 下载量: 4 CSCD: 0

PDF
Export
Share
Collection
Album

Image detection method for wheel-rail attack angle of vehicle mounted camera
Vol. 23, Issue 3, Pages: 418-427(2018)
Received：19 July 2017，

Revised：2017-10-18，

Published：16 March 2018
DOI： 10.11834/jig.170396
稿件说明：

移动端阅览

DOI：

Zengqiang Ma, Zibin Song, Yongsheng Wang. Image detection method for wheel-rail attack angle of vehicle mounted camera[J]. Journal of Image and Graphics, 2018, 23(3): 418-427. DOI： 10.11834/jig.170396.

摘要

目的

在列车运行安全性评价中，轮轨冲角是一关键性指标。列车运行过程中车体存在强烈振动，而且在基于应变片及传感器的冲角接触测量方法中存在许多弊端，例如丢失，损坏等问题，但冲角作为轮轨接触安全状态评价中的重要参数，对列车运行稳定性评价方面具有重要意义。为了避免接触测量方法中测量传感部件易损坏，丢失以及冲角值小等原因导致轮轨冲角检测难度大等问题，提出了一种新的轮轨冲角的图像检测方法。

方法

首先，将CCD传感器安装在转向架上构成视觉检测系统；其次，根据相机物像空间几何成像模型建立车轮运动中轮缘角度与图像中椭圆短轴变化关系，实现对3维空间中轮缘位置和角度信息的采样与记录，并证明了轮缘几何特性与车轮偏转角度之间单一映射关系，将轮轨冲角

的检测转化为椭圆短轴长度特征的检测，缩减了检测难度，增加了可行性；最后，给出冲角仿真结果。

结果

实验结果表明，该方法测得的冲角值与使用仪器检测的冲角数值平均误差为0.024°，最大误差0.084°，单帧图像检测时间大约400 ms，通过仿真得出冲角的范围在0.75°内，且随机车速度的增大而增大，冲角在径向机构未锁定时小于锁定状态。

结论

该方法检测速度较快且准确性较高，具有一定的工程应用价值，能为后续列车运行的稳定性和安全性评价奠定了一定的基础。

Abstract

Objective

Wheel-rail attack angle is a key index in the evaluation of locomotive operation safety. Strong vibration occurs during the train operation process

and many disadvantages in the attack angle measurement methods exist based on the strain gauge transducer and sensor in the contact measurement

such as loss

damage

and other problems. The attack angle

as an important parameter in safety evaluation and the evaluation of the running stability of trains

has great significance. A new method forimage detection of wheel-rail attack angle is proposed to avoid issues in contact detection

such as the loss and damage of sensors and detection difficulty due to the minimal value of the attack angle.

Method

This method uses a charge-coupled devicesensor installed on the train bogie to form a visual inspection system. The single mapping relationship between the geometry of the target image and the object deflects the attack angle of the wheel-rail. Thus

the parameter of the attackangle

measurement of locomotive inspection into the detection of elliptic geometry includes the characteristic of the minor axis and the major axis. This parameter reduces the difficulty of wheel-rail attack angle detection and increases the feasibility of the measuring method

thereby ensuring easy image detection of the locomotive attack angle. Simulation results of the attack angle are given to prove measurement accuracy and availability.

Result

Experimental results show that the average error between the value of the attack angle measured by a measuring apparatus and theangle used by the proposed method is 0.024°. For the experimental data

the maximum error is 0.084°

and the simulation model of attack angle is established. The changes before the locking mechanism and after locking the radial angle are compared. The angle value is large when the locking mechanism is locked. The single frame image detection time is approximately 400ms

which is related to the velocity of the train; the result is highly accurate.

Conclusion

The proposed method detects the wheel-rail attack angle quickly and achieves a highly accurate result. Thus

this study establishes a foundation for the stability and safety evaluation of trains.

关键词

Keywords

references

Xiao X B. Study on High-Speed TrainDerailment Mechanism in Severe Enwironment[D].ChengDu.Southwest Jiaotong University.2013.

肖新标. 复杂环境状态下高速列车脱轨机理研究[D]. 成都: 西南交通大学, 2013

Li Chengxiang.Research on active attitude control of high speed train running and rolling[D].BeiJing, BeiJing Jiaotong University.

李呈祥. 高速列车运行横移及侧滚姿态主动控制研究[D]. 北京: 北京交通大学, 2014

Ceng L, Wheel rail contact coordinate calculation method based on wheel rail expression[J]. Journal of LanZhou Institute of Technology, 2015, 22(2):19-22.

程力.基于轮轨表达式的轮轨接触坐标计算方法[J].兰州工业学院学报, 2015, 22(2):19-22 [DOI:10.3969/j.issn.1009-2269.2015.02.005]

Chen J Z.Study on Theory of onboard Measurement of Wheel and Rail Forces[D].Chendu:Southwest Jiaotong University, 2008

陈建政. 轮轨作用力和接触点位置在线测量理论研究[D]. 成都: 西南交通大学, 2008

Gan F, DaiH Y.New eheel-rail contact point algorithm method based on the space vector mapping principle[J].Journal of Mechanical Engineering, 2015, 51(10)119-128.

干锋, 戴焕云.基于空间矢量映射的新型轮轨接触点算法[J].机械工程学报, 2015, 51(10):119-128 [DOI:10.3901/JME.2015.10.119]

Zhong H, Study on Optimization of Heavy-haul Wheel profile for Improving Rail-wheel Contract State[D]. Chendu:Southwest Jiaotong University, 2014

钟浩. 基于改善轮轨接触状态的重载车轮型面优化[D]. 成都: 西南交通大学, 2014

Polach O. Influence of wheel/rail contact geometry on the behavior of a railway vehicle at stability limit[C]//Proceedings of ENOC-2005. Eindhoven, Netherlands:Eindhoven University of Technology, 2005:2203-2210.[ DOI:10.1115/1.4006825 http://dx.doi.org/10.1115/1.4006825 ]

Pang G B, Wu C D, Li G.Study on the system of wheel rail attack angle of locomotive[J].Journal of Diesel Locomotive, 2005, 12(12):16-19.

庞国斌, 吴成德, 李刚.机车轮轨冲角测试系统研究[J].内燃机车, 2005, 12(12):16-19 [DOI:10.3969/j.issn.1003-1820.2005.12.004]

Koo J S, Choi S Y. Theoretical development of a simplified wheelset model to evaluate collision-induced derailments of rolling stock[J]. Journal of Sound and Vibration, 2012, 331(13):3172-3198.[DOI:10.1016/j.jsv.2012.02.014]

Wang C Y, WangW J, Gou J, et al.Effects of travers and yaw angel on rolling contact of wheel/rail[J].Machinery Design&Manufacture, 2012,12(12):31-33.

王彩芸, 王文健, 郭俊, 等.横移量、摇头角对轮轨滚动接触行为的影响研究[J].机械设计与制造, 2012, (12):31-33

Zheng G, Sun J H, Zhang G J. Dynamic measurement for the diameter of a train wheel based on structured-light vision[J]. Sensors, 2016, 16(4):564.[DOI:10.3390/s16040564]

Xiao F X, Shi Y.Study on the measuring device for attack angle of wheel/rail[J].Journal of Diesel Locomotive, 1997, (2);44-48.

肖绯雄, 史炎.轮轨冲角测量装置的研究[J].内燃机车, 1997, (2):44-48.

Xiao Q, Xu H X, Cheng L, et al.Creep characterisitics of high-speed wheel-rail steady-state rolling contact under diffierent attack angles[J].China Railway Science, 2014, 1:60-66,

肖乾, 徐红霞, 成棣, 等.不同轮轨冲角下高速轮轨稳态滚动接触的蠕滑特性[J].中国铁道科学, 2014, 35(1):60-66.[DOI:10.3969/j.issn.1001-4632.2014.01.10]

Wei Y P, Wu Y P, Duan Z D.Analysis of wheel railcontact characteristics under the state of serpentine movement of train[J].Railway Standard Design, ,2015, 59(3):37-40.

魏云鹏, 吴亚平, 段志东, 等.列车蛇形运动状态下轮轨接触特性分析[J].铁道标准设计, 2015, 59(3):37-40.

Li G H, Jin W, Fan R W.Reserch on the measurement system of the attack angle between wheel and rail based on image identification[J]. China RailwayScience, 2005, 26(5):82-85.

李国顺, 金炜, 范荣巍.基于图像识别的轮轨冲角测量系统研究[J].中国铁道科学, 2005, 26(5):82-85 [DOI:10.3321/j.issn:1001-4632.2005.05.017]

Prasad D K, Leung M K H, Cho S Y. Edge curvature and convexity based ellipse detection method[J]. Pattern Recognition, 2012, 45(9):3204-3221.[DOI:10.1016/j.patcog.2012.02.014]

WangX K, Li F.The method of Improved adaptive median filter[J].Computer Engineering and Application, 2010, 46(3):175-176.

王晓凯, 李锋.改进的自适应中值滤波[J].计算机工程与应用, 2010, 46(3):175-176.[DOI:10.3778/j.issn.1002-8331.2010.03.053]

Wang W Y.Selecting the Optimal Gaussian Filtering Scale via the SNR of Image[J], Journal of Electronics&Information Technology, 2009, 31(10):2083-2087.

王文远.基于图像信噪比选择优化高斯滤波尺度[J].电子与信息学报, 2009, 31(10):2083-2087

Lou T, Zheng X F, Ding T F. Improved adaptive threshold Canny edge detection.[J].Opto-Electronic Engineering, 2009, 36(11):106-111.

雒涛, 郑喜凤, 丁铁夫.改进的自适应阈值Canny边缘检测[J].光电工程, 2009, 36(11):106-111 [DOI:10.3969/j.issn.1003-501X.2009.11.022]

Yang J N, Shi Z K, Shu T.An image-based method to detect steering angle of moving vechle[J]Journal of Xi'an Jiao Tong University, 2013, (6):73-78.

杨隽楠, 史忠科, 舒甜.车辆转向角的图像检测方法研究[J].西安交通大学学报, 2013, (6):73-78

Ma H, Zhang J, Zhang X J, et al.Influnence of attack angle on wheel/rail contact of low-floor vehicles[J].Journal of Mechanical Engineering, 2015, 51(24):112-117]

马贺, 张军, 张秀娟, 等.冲角对低地板车辆轮轨接触状况的影响[J].机械工程学报, 2015, 51(24):112-117. [DOI:10.3901/JME.2015.24.112]

Alert me when the article has been cited

提交

A Method for Fetal Head Ellipse Detection in Ultrasound Image

Improved method for the pupil measurement under occlusion

Fast ellipse detection for target images in ICF experiment

Underwater man-made object localization based on line feature of image and surface feature of point cloud