浏览全部资源
扫码关注微信
收稿：2018-12-12，
修回：2019-4-17，
纸质出版：2019-09-16
移动端阅览
目的
2
高填方渠段渗漏监测技术是南水北调工程安全监测的关键技术之一。针对目前高填方渠道渗漏检测易受环境干扰导致判断结果不准确的问题，设计了基于Gabor-SVM（support vector machine）的南水北调中线工程高填方渠道水泥坡面破损识别模型。
方法
2
首先对高填方渠道水泥渠面图像进行预处理；然后研究Gabor小波的多方向/尺度选择特性，对提取的水泥坡面图像特征进行分析，寻找最佳尺度/方向参数组；最后根据训练好的样本特征，用SVM进行水泥坡面破损等级的分类处理，将破损类别划分为正常、裂缝、孔洞及破碎4种。在相同环境下，将Gabor-SVM与直方图-SVM、灰度共生矩阵-SVM、Canny边缘检测算法-SVM的破损识别进行比较分析。
结果
2
基于Gabor-SVM的水泥面破损识别方法在小波取6/12参数时，整体识别结果最佳，其中正常、裂缝、孔洞、破碎的识别率分别为98%、63%、88%、90%，平均识别率约为85%，相比其他几种方法的平均识别率（约50%），Gabor-SVM方法具有更好的识别能力。
结论
2
基于Gabor-SVM的水泥渠面破损识别模型有一定的识别效果，但对裂缝类别的高填方水泥坡面识别效果不理想，还需要进一步深入研究，以期为查找南水北调高填方渠道渗漏隐患提供技术支持。
Objective
2
The leakage monitoring technology of high fill channels is key to the safe monitoring of the South-to-North Water Transfer Project. Aimed at addressing the current problem of leakage detection for high fill channels being easily affected by the environment and resulting in inaccurate judgment results
a model based on Gabor-support vector machine (SVM) is designed for damage monitoring in the cement slope of the high fill channel in the middle route of the South-to-North Water Transfer Project. The high fill channel is widely distributed in the middle route of the South-to-North Water Transfer Project. As a result of the high filling height
wide distribution range
and complex engineering geological conditions of the middle route of the South-to-North Water Transfer Project
the lining panel is cracked
the canal slope surface is damaged
and seepage occurs. Although the effect of leakage is small
the long channel still leads to a large leakage. Therefore
monitoring the seepage of the high fill channel is necessary to ensure its safe operation.
Method
2
The image of the high fill channel cement is preprocessed. In general
because the acquired image is affected by various noises
it needs to be preprocessed before extracting its features. These processing methods include image enhancement
median filtering
and grayscale processing. Then
Gabor wavelet is used to extract the texture features of the image
as well as the image convolution
commonly used amplitude
and phase to represent the texture features. The amplitude information reflects the energy spectrum of the image and is relatively stable. Therefore
amplitude information is selected as the extracted characteristic data. After analyzing the mean and variance eigenvalues of the amplitude
the image features of the variance are linearly separable. Therefore
the variance characteristic data of amplitude are considered as the characteristic data for classification and recognition. Under the scale and direction of different Gabor wavelets
the image characteristics of the extracted cement slope are analyzed to find the optimal scale and direction parameter group. The scale range is 17
and the direction range is 113. Different Gabor filters are obtained according to different directions and scales. Different Gabor filters are used to filter the high fill cement slope and thereby obtain different image features. Finally
according to the well-trained sample features
SVM is used to classify the damage degrees of cement slope
and the recognition results are refined with the following labels:normal
crack
fracture
and hole. At the same time
various feature extraction methods are studied to objectively reflect the recognition effects of Gabor-SVM. These methods include histogram-SVM
grayscale symbiosis matrix-SVM
and Canny edge detection algorithm-SVM.
Result
2
Experimental results show that the damage recognition model of the cement surface based on Gabor-SVM tends to have a stable value when the small wave has the 6th scales and the 12th directions. The recognition rate of the normal slope image is generally good and stable
mostly distributed between 0.8 and 1.0. The recognition rate of the slope image under the crack category presents stable growth from low to high
but the overall recognition rate is low
with most values being in the range of 0.500.65. The recognition rate of the slope image of the hole type fluctuates greatly
and its recognition rate has a significant relationship with scale changes. For example
when the scale value is 1 or 2
the recognition rate is low. When the scale value is 3
4
or 5
the recognition rate increases gradually. When the scale value is 6 or 7
the recognition rate decreases. The recognition rate is mostly distributed between 0.78 and 0.88. A certain relationship exists between the size of the slope image recognition rate of the fracture category and the scale. It has the characteristic of fluctuating growth from low to high and then to low
and the recognition rate is generally between 0.80 and 0.95. The normal
crack
hole
and fracture recognition rates are 0.98
0.63
0.88
and 0.90
respectively. The average recognition rate of the Gabor-SVM method is approximately 0.85. Compared with the average recognition rates of the other methods (approximately 0.50)
that of the proposed method has better recognition ability.
Conclusion
2
The damage recognition model based on Gabor-SVM has a slight recognition effect. The recognition effect peaks given 6 scales/12 directions. The average recognition rate of the Gabor-SVM method for the slope of the high fill channel cement is approximately 0.85. Meanwhile
the cement surface recognition effect of the crack category is unsatisfactory at 0.63. Thus
further research is required to provide technical support for finding the hidden dangers of high fill channels in the South-to-North Water Transfer Project.
Cui G, Chen J S, Wang L L. Design scheme of seepage flow monitoring in high fill section of south-to-north water diversion project[J]. West-China Exploration Engineering, 2013, 25(2):39-41.
崔岗, 陈俊生, 王丽丽.南水北调高填方段渗流监测设计方案[J].西部探矿工程, 2013, 25(2):39-41. [DOI:10.3969/j.issn.1004-5716.2013.02.014]
Qu Z G, Shen L P, Li M X, et al. Effective reinforcement measures for high-filled canal of middle route project of south-to-north water diversion[J]. Yangtze River, 2013, 44(16):63-66.
屈志刚, 申黎平, 李明新, 等.南水北调中线工程高填方渠道加强措施探讨[J].人民长江, 2013, 44(16):63-66. [DOI:10.3969/j.issn.1001-4179.2013.16.018]
Guo H, Chen X D, Liu G. Study on the practices of water rights trading in south-to-north water diversion middle route project[J]. South-to-North Water Transfers and Water Science&Technology, 2018, 16(3):175-182.
郭晖, 陈向东, 刘钢.南水北调中线工程水权交易实践探析[J].南水北调与水利科技, 2018, 16(3):175-182. [DOI:10.13476/j.cnki.nsbdqk.2018.0085]
Hou Q W, Feng X B, Li Z J, et al. Physical simulation-based experimental study on acting force from ice-cover on canal of the south-to-north water diversion middle route project[J]. Water Resources and Hydropower Engineering, 2018, 49(2):63-69.
侯倩文, 冯晓波, 李志军, 等.冰盖对南水北调中线工程渠道作用力物理模拟试验研究[J].水利水电技术, 2018, 49(2):63-69. [DOI:10.13928/j.cnki.wrahe.2018.02.010]
Coggon J H. Electromagnetic and electrical modeling by the finite element method[J]. Geophysics, 1971, 36(1):132-155.[DOI:10.1190/1.1440151]
Lin C H, Lin C P, Hung Y C, et al. Application of geophysical methods in a dam project:life cycle perspective and Taiwan experience[J]. Journal of Applied Geophysics, 2018, 158:82-92.[DOI:10.1016/j.jappgeo.2018.07.012]
Bernstone C, Heyden A. Image analysis for monitoring of crack growth in hydropower concrete structures[J]. Measurement, 2009, 42(6):878-893.[DOI:10.1016/j.measurement.2009.01.007]
Fu X H. Seepage analysis of south to north water transfer midline high fill canal segment[D]. Zhengzhou: North China University of Water Resources and Electric Power, 2014.
付新航.南水北调中线干线工程高填方渠段渗流分析[D].郑州: 华北水利水电大学, 2014. [ DOI: 10.7666/d.D543214 http://dx.doi.org/10.7666/d.D543214 ]
Tian Z Z. Research on the multi-source data fusion model for leakage monitoring of high filled channel of south-to-north water transfer project[D]. Zhengzhou: North China University of Water Resources and Electric Power, 2017.
田壮壮.南水北调高填方渠道渗漏监测的多源数据融合模型研究[D].郑州: 华北水利水电大学, 2017.
Yang X, Yang X. An algorithm for estimating the precision of scene guidance based on Gabor wavelet[J]. Computer Engineering, 2003, 29(18):72-73, 103.
杨昕, 杨新.一种基于Gabor小波的制导精度预测方法[J].计算机工程, 2003, 29(18):72-73, 103. [DOI:10.3969/j.issn.1000-3428.2003.18.030]
Yang J H, Yao J P, Fan L, et al. Research on veneer surface crack image processing methods[J]. Forestry Machinery&Woodworking Equipment, 2017, 45(4):29-31.
杨建华, 姚建平, 范磊, 等.单板表面裂缝图像处理方法研究[J].林业机械与木工设备, 2017, 45(4):29-31.
Sun L, Xing J C, Xie L Q, et al. An adaptive threshold-based canny algorithm for crack detection[J]. Microcomputer&Its Applications, 2017, 36(5):35-37, 41.
孙亮, 邢建春, 谢立强, 等.基于自适应阈值Canny算法的裂缝检测方法研究[J].微型机与应用, 2017, 36(5):35-37, 41. [DOI:10.19358/j.issn.1674-7720.2017.05.012]
Cheng C H. The analysis of concrete cracks'fractal and graylevel cooccurrence matrix[J]. Low Temperature Architecture Technology, 2014, 36(7):13-15.
程昌宏.混凝土裂缝分形和灰度共生矩阵分析[J].低温建筑技术, 2014, 36(7):13-15.
Hadizadeh H. Multi-resolution local Gabor wavelets binary patterns for gray-scale texture description[J]. Pattern Recognition Letters, 2015, 65:163-169.[DOI:10.1016/j.patrec.2015.07.038]
Xu W. Research of face recognition methods based on Gabor features and SVM[D]. Urumqi: Xinjiang University, 2015.
许伟.基于Gabor特征和SVM的人脸识别方法研究[D].乌鲁木齐: 新疆大学, 2015.
Fisher W D, Camp T K, Krzhizhanovskaya V V. Crack detection in earth dam and levee passive seismic data using support vector machines[J]. Procedia Computer Science, 2016, 80:577-586.[DOI:10.1016/j.procs.2016.05.339]
Xia M, Lu W T, Yang J, et al. A hybrid method based on extreme learning machine and $k$-nearest neighbor for cloud classification of ground-based visible cloud image[J]. Neurocomputing, 2015, 160:238-249.[DOI:10.1016/j.neucom.2015.02.022]
Xing Y, Yang Q S, Guo C A. Face recognition based on Gabor enhanced marginal fisher model and error correction SVM[C]//Proceedings of the 8th International Symposium on Neural Networks. Guilin, China: Springer-Verlag, 2011: 296-304.[ DOI: 10.1007/978-3-642-21090-7_35 http://dx.doi.org/10.1007/978-3-642-21090-7_35 ]
Zhang G, Ma Z M. An approach of using Gabor wavelets for texture feature extraction[J]. Journal of Image and Graphics, 2010, 15(2):247-254.
张刚, 马宗民.一种采用Gabor小波的纹理特征提取方法[J].中国图象图形学报, 2010, 15(2):247-254. [DOI:10.11834/jig.20100210]
Chaudhari S, Gulati R M. Script identification using Gabor feature and SVM classifier[J]. Procedia Computer Science, 2016, 79:85-92.[DOI:10.1016/j.procs.2016.03.012]
Qi D F, Wu C D. Face recognition based on Gabor wavelet transform and support vector machine[J]. Science&Technology Information, 2009, (35):31-32.
戚大方, 吴成东.基于Gabor小波变换与支持向量机的人脸识别[J].科技信息, 2009, (35):31-32. [DOI:10.3969/j.issn.1001-9960.2009.35.344]
Li Q X. Research on face expression recognition algorithm based on improved Gabor wavelet feature extraction[D]. Qinhuangdao: Yanshan University, 2017.
李清霞.基于改进的Gabor小波特征提取的人脸表情识别算法研究[D].秦皇岛: 燕山大学, 2017.
Panja R, Pal N R. MS-SVM:minimally spanned support vector machine[J]. Applied Soft Computing, 2018, 64:356-365.[DOI:10.1016/j.asoc.2017.12.017]
Liu Y, Wen K W, Gao Q X, et al. SVM based multi-label learning with missing labels for image annotation[J]. Pattern Recognition, 2018, 78:307-317.[DOI:10.1016/j.patcog.2018.01.022]
Shi Y G, Cheng K, Liu Z W. Segmentation of hippocampal subfields by using deep learning and support vector machine[J]. Journal of Image and Graphics, 2018, 23(4):542-551.
时永刚, 程坤, 刘志文.结合深度学习和支持向量机的海马子区图像分割[J].中国图象图形学报, 2018, 23(4):542-551. [DOI:10.11834/jig.170431]
Zhang Y, Chen S X, Yu F, et al. Calculation method study of settlement process of high filling channels in south-to-north water diversion project[J]. Chinese Journal of Rock Mechanics and Engineering, 2014, 33(S2):4367-4374.
张宇, 陈善雄, 余飞, 等.南水北调高填方渠道沉降过程计算方法研究[J].岩石力学与工程学报, 2014, 33(S2):4367-4374. [DOI:10.13722/j.cnki.jrme.2014.s2.122]
Xin H Y. Construction technology of plastic concrete barrier wall in high fill canal section[J]. Henan Water Resources&South-to-North Water Diversion, 2012, (18):134-135.
辛贺艳.高填方渠段塑性混凝土防渗墙施工技术[J].河南水利与南水北调, 2012,(18):134-135.
Wang Y X. On reasons for damages of the cement concrete pavement[J]. Shanxi Architecture, 2009, 35(5):275-276.
王彦须.水泥混凝土路面破损原因分析[J].山西建筑, 2009, 35(5):275-276. [DOI:10.3969/j.issn.1009-6825.2009.05.174]
Luo R. Research of pavement crack detection algorithm based on Image processing[D]. Wuhu: Anhui Polytechnic University, 2017.
罗瑞.基于图像处理的路面裂缝检测算法研究[D].芜湖: 安徽工程大学, 2017.
相关文章
相关作者
相关机构
京公网安备11010802024621
